Use Shower Curtain Rings to Make Your Table Prettier

Looking to spruce up your table on a budget? An easy and affordable way to add a touch of charm is by using shower curtain rings as napkin holders! Not only are these rings inexpensive and readily available, but they also come in various styles and finishes to match any table setting. Simply slide a cloth napkin through the ring and place it on your table to instantly elevate the look. It's a simple yet clever trick that will leave your guests impressed with your creativity and attention to detail! Make your next meal more special with this quick and charming table decor idea.

Cheap plastic shower curtain rings will be the base for my custom napkin rings.

This is so easy with some hot glue! Use some hot glue to glue your rings together as shown above.

For my needs, I found 3 rings would be the perfect width. I used the hot glue to secure them together and then let them cool completely.

When all of my rings were glued together it was time to start covering them with ribbon. Blue is a primary color in my home, so dark blue ribbon was going to be perfect! I began with a small amount of hot glue on the inside of my rings with the end of some navy blue satin ribbon stuck into the glue. I used about four feet of ribbon for each napkin ring.

Wrapping the the ribbon tightly around the rings I made sure I over lapped it enough so none of the white showed through between the ribbon.

These looked pretty enough I could have just used these like this, but I spotted these beautiful sunflowers with deep blue centers in them that I wanted to use for these napkin rings.

I pulled the sunflower blossoms off the bush they were on and used the hot glue to attach the blossoms right where the indentation on the shower rings was.

With these dark blue centers on the sunflowers, I knew these were going to be stunning on my table.